Catalog prices in USD
Container prices exclude tax, transport and unloading. The supplier’s proposal details these separately.
View models and prices40′ Double Door
- External length
- 12.192m
- External height
- 2.591m
- Floor area
- 29.7m²
- Volume
- 66.6m³
A closer look at this condition
Used · last trip
Used, last trip: more pronounced wear. Assess any repairs needed before choosing.
Understanding conditionTechnical sheet
External and internal dimensions, openings and price in a sheet you can keep.
Product details / United States
In stock40 ft double-door shipping container used · last trip · gray
ReferenceCA-40-DOUBLE-DOOR-C-GREY
This reference combines the 40-foot Double Door format with the gray color option and the condition “Used · last trip”. It is offered in stock under reference CA-40-DOUBLE-DOOR-C-GRAY. The Double Door configuration supports storage planning with access from both ends, distributing equipment and reducing the need to move contents. For this reference in United States, separate the container price in USD from transport to your site. Say whether you have lifting equipment or need unloading included in the proposal.
Container price
$2,685.5excl. tax / unit
Unit price excluding tax. Transport and unloading quoted separately.
No obligation · sent to suppliers through Quotbox
Choose condition
Used · last tripChoose color
GraySelected configurationUsed · last trip · Gray
About this reference
The 40-foot format serves a larger reserve or several activity zones. Its length makes organizing by access frequency useful, avoiding moving all the contents for each retrieval. Opposite entrances on the Double Door model let you assign an entrance to each storage zone. The arrangement is useful when both ends remain accessible; a partition or internal separation is a fit-out to specify. Nominal external model dimensions are 12.192 × 2.438 × 2.591 m (length × width × height); usable measurements of the actual unit need confirmation.
Last-trip condition describes a unit sold after its shipping service, with its own history to examine. This category calls for careful comparison of possible work and intended reuse. Suitability for further transport and required documentation must be checked separately. The gray color identifies this variant; request confirmation of its appearance and any paint repairs. Included equipment must be listed in the offer. Request recent photos of the proposed unit: catalog images illustrate the configuration.
Delivery & unloading
The displayed price covers the container excluding tax. Transport and unloading are quoted separately.
The supplier quotes delivery based on the destination, truck access and unloading equipment.
Describe maneuvering space, the ground and any obstacles near the placement area.
From the truck to your site
Plan access and placement together. These three views help you describe your site to the supplier.
Crane unloading
A truck-mounted crane can place the container from a suitable working area. The supplier confirms the vehicle, lifting reach and space needed for its stabilisers.
Access & maneuvering
Provide gate width, bends, slopes and obstacles. The access route must suit the selected truck, all the way to its unloading area.
Ground & door clearance
Prepare a stable, level position. Leave space in front of the doors for their swing and handling goods; the supplier confirms suitable supports.
4 details to share
- Gate and maneuvering space
- Ground type and stability
- Overhead cables, branches and obstacles
- Final position and door clearance
Unsure about unloading? Describe access and placement, adding photos where possible. The supplier proposes a solution and states its cost.
Illustrative diagrams, not to scale. The supplier confirms vehicle dimensions, distances and unloading method for your site.
YOUR DESTINATION
A container for your project · United States
Your project for United States: use this guide to prepare placement alongside the technical container choice. If the land is away from the stated street, add directions to the entrance and a landmark. Say whether you have lifting equipment or need unloading included in the proposal.
Prepare your address
- ZIP code · Format example
- 10001
- Local format
- 5 digits; keep any leading zero
Provide the ZIP code, city, state and physical site address. A PO box does not describe where to place the container.
From truck to final position
Describe gate width, maneuvering space, ground conditions and overhead cables or branches. Say whether you have lifting equipment or need a crane truck.
Prepare for deliveryDelivery feasibility, vehicle, unloading and timing are confirmed for the supplied address. Selecting a country does not confirm local availability.
01 / Specifications
Dimensions
- External length
- 12.192m
- External width
- 2.438m
- External height
- 2.591m
- Floor area
- 29.7m²
- Typical internal capacity
- 66.6m³
Dimensioned drawing · external dimensions
See the size at a glance
Side viewLength
End viewWidth / Height
Length 12.192 m · Width 2.438 m · Height 2.591 m
Cargo-door clearance (Width × Height)2.340 m × 2.260 m
Schematic drawing of the external envelope. Typical catalog dimensions; equipment and openings vary by reference and manufacturer.
- Internal dimensions
- 11.970 × 2.350 × 2.369 mlength × width × height
- Opening at each end
- 2.340 × 2.260 mwidth × height
Typical dimensions for this model. Small variations are possible between manufacturers.
40′ / Double Door
This container for your project
Container 40 ft Double Door · Used · last trip · Gray. For this reference, match your intended use with the access required and the details to include in the offer.
Possible uses
- Storage accessible from both ends
- Equipment retrieved by zone
- Longitudinal loading
What to consider
Two entrances need two clear areas; an internal partition is not listed as included. The length requires an organized route to the rear and a site that allows delivery manoeuvres.
To compare other configurations in the same format, see the catalog’s 40-foot containers.
Plan the access
Keep both ends clear with a handling route on each side. Give the city, state, ZIP code and physical address; a PO box does not describe the placement site.
Before choosing this unit
Have both door sets, their seals and their locking mechanisms checked. To prepare these choices, use the dimensions and openings guide.
For a last-trip unit, ask about planned repairs and structural condition; suitability for further transport must be checked separately. Follow the steps in the used-container inspection guide.
Request recent photos of the actual unit, its identification and an offer listing included equipment and planned repairs.
Frequently asked questions
Dimensions, access, storage and delivery: practical answers for your project.
How are the two Double Door entrances useful?
Doors at both ends let you reach goods from the nearer end without emptying the whole length. This 40-foot model offers about 66.6 m³ and can organize two storage zones with separate access. Keep both ends accessible on your site plan; adding a partition is a separate modification.
How do I use the doors at both ends?
Each end has a typical opening of 2.340 × 2.260 m (width × height). Leave clearance for each set of doors and identify your handling approach on the site plan. This arrangement allows access along the length without turning the entire sidewalls into openings.
What are the dimensions and floor area of this 40-foot container?
Outside (length × width × height): 12.192 × 2.438 × 2.591 m, occupying about 29.7 m². Typical inside dimensions (length × width × height): 11.970 × 2.350 × 2.369 m, with about 28.1 m² of floor area and 66.6 m³. The door opening is 2.340 × 2.260 m (width × height), separate from the internal dimensions. These are model reference dimensions; manufacturing and equipment can cause small differences.
What does “Used · last trip” mean for this container?
Last trip describes a container sold at the end of its shipping service, not automatically one in poor condition. Wear and repairs depend on the unit: examine its doors, floor and seals in recent photographs. For further transport, unit suitability and CSC plate validity must be assessed separately from this description.
How can I reduce moisture and condensation during storage?
A metal wall can collect condensation when humid air meets a cold surface, even without water ingress. Store dry goods, pallets and packaging, maintain air circulation around the load and monitor humidity, especially after large temperature changes. Sensitive goods need moisture protection and ventilation suitable for their use. An uninsulated dry container does not maintain a constant temperature.
Does the price include delivery and taxes?
This configuration costs $2,685.5 excluding tax for one container. Transport, unloading and any fit-out are quoted separately for your request. Currency and price follow the selected country; the proposal sets out applicable taxes and the complete amount.
What should I prepare to request a project quote for United States?
The container occupies about 29.7 m², with an external base of 12.192 × 2.438 m. That area excludes door swing and space for the truck and handling equipment. Prepare a stable, level location and provide the ZIP code or area, narrow passages, turns, slopes, obstacles and available unloading equipment. These details support transport pricing and selection of a suitable vehicle. Give the city, state, ZIP code and physical address; a PO box does not describe the placement site. ZIP code: 5 digits, retaining any leading zero. Format example: 10001. Use your site’s code, not this example. If the land is away from the stated street, add directions to the entrance and a landmark. Say whether you have lifting equipment or need unloading included in the proposal. The proposal should confirm transport, unloading, availability and timing for this site.
What happens after I submit my ZIP code request?
Your selection and delivery details are sent through Quotbox to approach suppliers. They are used to propose a unit and detail the container, taxes, transport and unloading. You can compare that proposal and refine your project before accepting it. The form is a no-obligation inquiry with no automatic purchase or payment.
