Catalogue prices in SGD
Container prices exclude tax, transport and unloading. The supplier’s proposal details these separately.
View models and prices
A closer look at this condition
Used, very good condition: limited visible wear, with some signs of use possible.
Understanding conditionExternal and internal dimensions, openings and price in a sheet you can keep.
Product details / Singapore
In stockReferenceCA-20-DOUBLE-DOOR-A-GREEN
This reference combines the 20-foot Double Door format with the green colour option and the condition “Used · excellent condition”. It is offered in stock under reference CA-20-DOUBLE-DOOR-A-GREEN. The Double Door configuration supports storage planning with access from both ends, distributing equipment and reducing the need to move contents. For this reference in Singapore, separate the container price in SGD from transport to your site. Measure the usable gate width and height, and identify obstacles near the entrance.
Container price
$3,669.5excl. tax / unit
Unit price excluding tax. Transport and unloading quoted separately.
No obligation · sent to suppliers through Quotbox
Selected configurationUsed · excellent condition · Green
The 20-foot format allows a separate reserve with frequently used items apart from rear storage. A simple furniture or goods layout helps make use of the available length. Opposite entrances on the Double Door model let you assign an entrance to each storage zone. The arrangement is useful when both ends remain accessible; a partition or internal separation is a fit-out to specify. Nominal external model dimensions are 6.058 × 2.438 × 2.591 m (length × width × height); usable measurements of the actual unit need confirmation.
Used, excellent condition offers a balance between reuse and a presentable appearance. Actual wear depends on the unit. Pay attention to doors, seals, flooring and repairs already performed when comparing the offer with the finish you expect. The green colour identifies this variant; request confirmation of its appearance and any paint repairs. Included equipment must be listed in the offer. Request recent photos of the proposed unit: catalogue images illustrate the configuration.
The displayed price covers the container excluding tax. Transport and unloading are quoted separately.
The supplier quotes delivery based on the destination, truck access and unloading equipment.
Describe manoeuvring space, the ground and any obstacles near the placement area.
Plan access and placement together. These three views help you describe your site to the supplier.
A truck-mounted crane can place the container from a suitable working area. The supplier confirms the vehicle, lifting reach and space needed for its stabilisers.
Provide gate width, bends, slopes and obstacles. The access route must suit the selected truck, all the way to its unloading area.
Prepare a stable, level position. Leave space in front of the doors for their swing and handling goods; the supplier confirms suitable supports.
Unsure about unloading? Describe access and placement, adding photos where possible. The supplier proposes a solution and states its cost.
Illustrative diagrams, not to scale. The supplier confirms vehicle dimensions, distances and unloading method for your site.
YOUR DESTINATION
Your project for Singapore: use this guide to prepare placement alongside the technical container choice. Give the site’s access hours and arrange for someone to receive the vehicle. Measure the usable gate width and height, and identify obstacles near the entrance.
Container prices exclude tax, transport and unloading. The supplier’s proposal details these separately.
View models and pricesGive the six-digit postcode, building and delivery entrance. Specify site access conditions and the intended ground-level container position.
Describe gate width, manoeuvring space, ground conditions and overhead cables or branches. Say whether you have lifting equipment or need a crane truck.
Prepare for deliveryDelivery feasibility, vehicle, unloading and timing are confirmed for the supplied address. Selecting a country does not confirm local availability.
01 / Specifications
Dimensioned drawing · external dimensions
Side viewLength
End viewWidth / Height
Length 6.058 m · Width 2.438 m · Height 2.591 m
Cargo-door clearance (Width × Height)2.340 m × 2.280 m
Schematic drawing of the external envelope. Typical catalogue dimensions; equipment and openings vary by reference and manufacturer.
Typical dimensions for this model. Small variations are possible between manufacturers.
20′ / Double Door
Container 20 ft Double Door · Used · excellent condition · Green. For this reference, match your intended use with the access required and the details to include in the offer.
Two entrances need two clear areas; an internal partition is not listed as included. Allow a handling route in addition to the space occupied by this format.
To compare other configurations in the same format, see the catalogue’s 20-foot containers.
Keep both ends clear with a handling route on each side. Give the six-digit postal code, building and delivery entrance, followed by the intended ground-level position.
Have both door sets, their seals and their locking mechanisms checked. To prepare these choices, use the dimensions and openings guide.
For this used unit in excellent condition, have door closure, seals and any repairs checked. Follow the steps in the used-container inspection guide.
Request recent photos of the actual unit, its identification and an offer listing included equipment and planned repairs.
Dimensions, access, storage and delivery: practical answers for your project.
Doors at both ends let you reach goods from the nearer end without emptying the whole length. This 20-foot model offers about 32.9 m³ and can organize two storage zones with separate access. Keep both ends accessible on your site plan; adding a partition is a separate modification.
Each end has a typical opening of 2.340 × 2.280 m (width × height). Leave clearance for each set of doors and identify your handling approach on the site plan. This arrangement allows access along the length without turning the entire sidewalls into openings.
Outside (length × width × height): 6.058 × 2.438 × 2.591 m, occupying about 14.8 m². Typical inside dimensions (length × width × height): 5.840 × 2.352 × 2.391 m, with about 13.7 m² of floor area and 32.9 m³. The door opening is 2.340 × 2.280 m (width × height), separate from the internal dimensions. These are model reference dimensions; manufacturing and equipment can cause small differences.
Excellent condition here describes a used container with limited visible wear and possible handling marks. For a presentable project or frequent access, consider door operation, seals and the floor. Photographs of the offered unit show these points; the catalogue illustration does not show its history.
A metal wall can collect condensation when humid air meets a cold surface, even without water ingress. Store dry goods, pallets and packaging, maintain air circulation around the load and monitor humidity, especially after large temperature changes. Sensitive goods need moisture protection and ventilation suitable for their use. An uninsulated dry container does not maintain a constant temperature.
This configuration costs $3,669.5 excluding tax for one container. Transport, unloading and any fit-out are quoted separately for your request. Currency and price follow the selected country; the proposal sets out applicable taxes and the complete amount.
The container occupies about 14.8 m², with an external base of 6.058 × 2.438 m. That area excludes door swing and space for the truck and handling equipment. Prepare a stable, level location and provide the postcode or area, narrow passages, turns, slopes, obstacles and available unloading equipment. These details support transport pricing and selection of a suitable vehicle. Give the six-digit postal code, building and delivery entrance, followed by the intended ground-level position. Postal code: 6 digits, retaining any leading zero. Format example: 018956. Use your site’s code, not this example. Give the site’s access hours and arrange for someone to receive the vehicle. Measure the usable gate width and height, and identify obstacles near the entrance. The proposal should confirm transport, unloading, availability and timing for this site.
Your selection and delivery details are sent through Quotbox to approach suppliers. They are used to propose a unit and detail the container, taxes, transport and unloading. You can compare that proposal and refine your project before accepting it. The form is a no-obligation enquiry with no automatic purchase or payment.
$3,669.5excl. tax / unit