Catalogue prices in EUR
Container prices exclude tax, transport and unloading. The supplier’s proposal details these separately.
View models and prices40′ Refrigerated
- External length
- 12,192m
- External height
- 2,591m
- Floor area
- 29,7m²
- Volume
- 59,3m³
A closer look at this condition
Used · last trip
Used, last trip: more pronounced wear. Assess any repairs needed before choosing.
Understanding conditionTechnical sheet
External and internal dimensions, openings and price in a sheet you can keep.
Product details / Estonia
In stock40 ft refrigerated shipping container used · last trip · beige
ReferenceCA-40-REEFER-C-BEIGE
This reference combines the 40-foot Refrigerated format with the beige colour option and the condition “Used · last trip”. It is offered in stock under reference CA-40-REEFER-C-BEIGE. The Refrigerated configuration addresses temperature-controlled storage, to be defined around the goods, site power and proposed refrigeration unit. For this reference in Estonia, separate the container price in EUR from transport to your site. Specify the entrance the truck can actually use, especially if it differs from the main address.
Container price
€7,605.5excl. tax / unit
Unit price excluding tax. Transport and unloading quoted separately.
No obligation · sent to suppliers through Quotbox
Choose condition
Used · last tripChoose colour
BeigeSelected configurationUsed · last trip · Beige
About this reference
The 40-foot format allows more batch zones along its length. Prepare a loading plan that reduces repeated handling and maintains air passages to the rear. The refrigerated model combines an insulated enclosure with a cooling arrangement to check. The unit, its test and required power determine possible use; insulation and airflow reduce the space to consider compared with a dry shell. Nominal external model dimensions are 12,192 × 2,438 × 2,591 m (length × width × height); usable measurements of the actual unit need confirmation.
Last-trip condition describes a unit sold after its shipping service, with its own history to examine. This category calls for careful comparison of possible work and intended reuse. Suitability for further transport and required documentation must be checked separately. The beige colour identifies this variant; request confirmation of its appearance and any paint repairs. Included equipment must be listed in the offer. Request recent photos of the proposed unit: catalogue images illustrate the configuration.
Delivery & unloading
The displayed price covers the container excluding tax. Transport and unloading are quoted separately.
The supplier quotes delivery based on the destination, truck access and unloading equipment.
Describe manoeuvring space, the ground and any obstacles near the placement area.
From the truck to your site
Plan access and placement together. These three views help you describe your site to the supplier.
Crane unloading
A truck-mounted crane can place the container from a suitable working area. The supplier confirms the vehicle, lifting reach and space needed for its stabilisers.
Access & manoeuvring
Provide gate width, bends, slopes and obstacles. The access route must suit the selected truck, all the way to its unloading area.
Ground & door clearance
Prepare a stable, level position. Leave space in front of the doors for their swing and handling goods; the supplier confirms suitable supports.
4 details to share
- Gate and manoeuvring space
- Ground type and stability
- Overhead cables, branches and obstacles
- Final position and door clearance
Unsure about unloading? Describe access and placement, adding photos where possible. The supplier proposes a solution and states its cost.
Illustrative diagrams, not to scale. The supplier confirms vehicle dimensions, distances and unloading method for your site.
YOUR DESTINATION
A container for your project · Estonia
Your project for Estonia: use this guide to prepare placement alongside the technical container choice. Include the building or site name when it helps identify the correct entrance. Specify the entrance the truck can actually use, especially if it differs from the main address.
Prepare your address
- Postal code · Format example
- 10111
- Local format
- 5 digits; keep any leading zero
Provide the full postcode, town and physical placement address, even if the site does not yet have a street number.
From truck to final position
Describe gate width, manoeuvring space, ground conditions and overhead cables or branches. Say whether you have lifting equipment or need a crane truck.
Prepare for deliveryDelivery feasibility, vehicle, unloading and timing are confirmed for the supplied address. Selecting a country does not confirm local availability.
01 / Specifications
Dimensions
- External length
- 12,192m
- External width
- 2,438m
- External height
- 2,591m
- Floor area
- 29,7m²
- Typical internal capacity
- 59,3m³
Dimensioned drawing · external dimensions
See the size at a glance
Side viewLength
End viewWidth / Height
Length 12,192 m · Width 2,438 m · Height 2,591 m
Cargo-door clearance (Width × Height)2,290 m × 2,260 m
Schematic drawing of the external envelope. Typical catalogue dimensions; equipment and openings vary by reference and manufacturer.
- Internal dimensions
- 11,560 × 2,280 × 2,250 mlength × width × height
- Door opening
- 2,290 × 2,260 mwidth × height
Typical dimensions for this model. Small variations are possible between manufacturers.
40′ / Refrigerated
This container for your project
Container 40 ft Refrigerated · Used · last trip · Beige. For this reference, match your intended use with the access required and the details to include in the offer.
Possible uses
- Cold storage at the required set point
- Temperature-sensitive products
- Seasonal storage capacity
What to consider
Cooling needs external power and a suitable unit; the illustration alone does not establish working condition. The length requires an organised route to the rear and a site that allows delivery manoeuvres.
To compare other configurations in the same format, see the catalogue’s 40-foot containers.
Plan the access
Plan power, airflow and access to the refrigeration unit for checks. Provide the town, street and placement-site number, or a precise landmark if the land has no number.
Before choosing this unit
Request a refrigeration test, unit identification and compatibility with your requirements. To prepare these choices, use the delivery preparation guide.
For a last-trip unit, ask about planned repairs and structural condition; suitability for further transport must be checked separately. Follow the steps in the used-container inspection guide.
Request recent photos of the actual unit, its identification and an offer listing included equipment and planned repairs.
Frequently asked questions
Dimensions, access, storage and delivery: practical answers for your project.
Can this reefer serve as a cold store?
This 40-foot model offers about 59,3 m³ in an insulated enclosure for temperature-controlled storage with a suitable refrigeration unit. The unit requires an external electrical supply; the container does not generate cooling independently. Your set point, goods and frequency of door opening determine the configuration you need.
How does insulation affect loading?
The typical door opening is 2,290 × 2,260 m (width × height). Insulation, the refrigeration unit and the air-distribution floor reduce usable space compared with a dry container of the same size. Keep air passages and the maximum load line clear: the geometric volume cannot all be filled with goods.
What are the dimensions and floor area of this 40-foot container?
Outside (length × width × height): 12,192 × 2,438 × 2,591 m, occupying about 29,7 m². Typical inside dimensions (length × width × height): 11,560 × 2,280 × 2,250 m, with about 26,4 m² of floor area and 59,3 m³. The door opening is 2,290 × 2,260 m (width × height), separate from the internal dimensions. These are model reference dimensions; manufacturing and equipment can cause small differences.
What does “Used · last trip” mean for this container?
Last trip describes a container sold at the end of its shipping service, not automatically one in poor condition. Wear and repairs depend on the unit: examine its doors, floor and seals in recent photographs. For further transport, unit suitability and CSC plate validity must be assessed separately from this description.
How should I arrange goods so chilled air can circulate?
Cooling depends on airflow around the goods, not only the temperature set point. Keep floor air channels clear and respect the load limit marked inside the unit. Products need to enter at a temperature compatible with the intended storage; frequent door opening and power interruptions alter internal conditions. Include electrical supply and temperature monitoring in your site arrangements.
Does the price include delivery and taxes?
This configuration costs €7,605.5 excluding tax for one container. Transport, unloading and any fit-out are quoted separately for your request. Currency and price follow the selected country; the proposal sets out applicable taxes and the complete amount.
What should I prepare to request a project quote for Estonia?
The container occupies about 29,7 m², with an external base of 12,192 × 2,438 m. That area excludes door swing and space for the truck and handling equipment. Prepare a stable, level location and provide the postcode or area, narrow passages, turns, slopes, obstacles and available unloading equipment. These details support transport pricing and selection of a suitable vehicle. Provide the town, street and placement-site number, or a precise landmark if the land has no number. Postal code: 5 digits, retaining any leading zero. Format example: 10111. Use your site’s code, not this example. Include the building or site name when it helps identify the correct entrance. Specify the entrance the truck can actually use, especially if it differs from the main address. The proposal should confirm transport, unloading, availability and timing for this site.
What happens after I submit my postcode request?
Your selection and delivery details are sent through Quotbox to approach suppliers. They are used to propose a unit and detail the container, taxes, transport and unloading. You can compare that proposal and refine your project before accepting it. The form is a no-obligation enquiry with no automatic purchase or payment.
