Catalogue prices in CAD
Container prices exclude tax, transport and unloading. The supplier’s proposal details these separately.
View models and prices20′ Open Side
- External length
- 6.058m
- External height
- 2.591m
- Floor area
- 14.8m²
- Volume
- 31.1m³
A closer look at this condition
Used · last trip
Used, last trip: more pronounced wear. Assess any repairs needed before choosing.
Understanding conditionTechnical sheet
External and internal dimensions, openings and price in a sheet you can keep.
Product details / Canada
In stock20 ft side-opening shipping container used · last trip · green
ReferenceCA-20-OPEN-SIDE-C-GREEN
This reference combines the 20-foot Open Side format with the green colour option and the condition “Used · last trip”. It is offered in stock under reference CA-20-OPEN-SIDE-C-GREEN. The Open Side configuration addresses loading from the side and access to several storage zones, depending on the intended placement. For this reference in Canada, separate the container price in CAD from transport to your site. If the land is away from the stated street, add directions to the entrance and a landmark.
Container price
$4,981.5excl. tax / unit
Unit price excluding tax. Transport and unloading quoted separately.
No obligation · sent to suppliers through Quotbox
Choose condition
Used · last tripChoose colour
GreenSelected configurationUsed · last trip · Green
About this reference
The 20-foot format allows a separate reserve with frequently used items apart from rear storage. A simple furniture or goods layout helps make use of the available length. The model’s side opening helps reach contents without concentrating all handling at one end. It suits wide objects or frequent access; actual clearance and room for door swing need checking. Nominal external model dimensions are 6.058 × 2.438 × 2.591 m (length × width × height); usable measurements of the actual unit need confirmation.
Last-trip condition describes a unit sold after its shipping service, with its own history to examine. This category calls for careful comparison of possible work and intended reuse. Suitability for further transport and required documentation must be checked separately. The green colour identifies this variant; request confirmation of its appearance and any paint repairs. Included equipment must be listed in the offer. Request recent photos of the proposed unit: catalogue images illustrate the configuration.
Delivery & unloading
The displayed price covers the container excluding tax. Transport and unloading are quoted separately.
The supplier quotes delivery based on the destination, truck access and unloading equipment.
Describe manoeuvring space, the ground and any obstacles near the placement area.
From the truck to your site
Plan access and placement together. These three views help you describe your site to the supplier.
Crane unloading
A truck-mounted crane can place the container from a suitable working area. The supplier confirms the vehicle, lifting reach and space needed for its stabilisers.
Access & manoeuvring
Provide gate width, bends, slopes and obstacles. The access route must suit the selected truck, all the way to its unloading area.
Ground & door clearance
Prepare a stable, level position. Leave space in front of the doors for their swing and handling goods; the supplier confirms suitable supports.
4 details to share
- Gate and manoeuvring space
- Ground type and stability
- Overhead cables, branches and obstacles
- Final position and door clearance
Unsure about unloading? Describe access and placement, adding photos where possible. The supplier proposes a solution and states its cost.
Illustrative diagrams, not to scale. The supplier confirms vehicle dimensions, distances and unloading method for your site.
YOUR DESTINATION
A container for your project · Canada
Your project for Canada: use this guide to prepare placement alongside the technical container choice. Specify the entrance the truck can actually use, especially if it differs from the main address. If the land is away from the stated street, add directions to the entrance and a landmark.
Prepare your address
- Postal code · Format example
- H2Y 1C6
- Local format
- 6 characters alternating letters and digits
Give the full alphanumeric postal code, municipality and province or territory. Specify the actual entrance for rural or industrial sites.
From truck to final position
Describe gate width, manoeuvring space, ground conditions and overhead cables or branches. Say whether you have lifting equipment or need a crane truck.
Prepare for deliveryDelivery feasibility, vehicle, unloading and timing are confirmed for the supplied address. Selecting a country does not confirm local availability.
01 / Specifications
Dimensions
- External length
- 6.058m
- External width
- 2.438m
- External height
- 2.591m
- Floor area
- 14.8m²
- Typical internal capacity
- 31.1m³
Dimensioned drawing · external dimensions
See the size at a glance
Side viewLength
End viewWidth / Height
Length 6.058 m · Width 2.438 m · Height 2.591 m
Cargo-door clearance (Width × Height)2.226 m × 2.189 m
Schematic drawing of the external envelope. Typical catalogue dimensions; equipment and openings vary by reference and manufacturer.
- Internal dimensions
- 5.898 × 2.287 × 2.287 mlength × width × height
- Door opening
- 2.226 × 2.189 mwidth × height
- Side opening
- 5.702 × 2.189 mwidth × height
Typical dimensions for this model. Small variations are possible between manufacturers.
20′ / Open Side
This container for your project
Container 20 ft Open Side · Used · last trip · Green. For this reference, match your intended use with the access required and the details to include in the offer.
Possible uses
- Side loading of wide equipment
- Access to several storage zones
- Frequently accessed storage
What to consider
Side-door swing adds to the footprint; a nearby fence may prevent opening. Allow a handling route in addition to the space occupied by this format.
To compare other configurations in the same format, see the catalogue’s 20-foot containers.
Plan the access
Leave a clear strip beside the opening side and its locking points. Give the municipality, province or territory and physical address with the complete postal code.
Before choosing this unit
Request actual side clearance and check that the doors can open fully on your site. To prepare these choices, use the dimensions and openings guide.
For a last-trip unit, ask about planned repairs and structural condition; suitability for further transport must be checked separately. Follow the steps in the used-container inspection guide.
Request recent photos of the actual unit, its identification and an offer listing included equipment and planned repairs.
Frequently asked questions
Dimensions, access, storage and delivery: practical answers for your project.
When is side opening useful?
It makes several storage zones accessible and allows wide objects to be loaded from the side. This 20-foot model offers about 31.1 m³ without restricting all handling to one end. Leave a clear strip beside the container; do not position the opening doors against a wall or fence.
How much space should I leave for side access?
The end doors have a typical opening of 2.226 × 2.189 m (width × height). Side doors give access along the side; their swing requires space beyond the container footprint. Position the handling route beside that face and keep the locking mechanisms accessible.
What are the dimensions and floor area of this 20-foot container?
Outside (length × width × height): 6.058 × 2.438 × 2.591 m, occupying about 14.8 m². Typical inside dimensions (length × width × height): 5.898 × 2.287 × 2.287 m, with about 13.5 m² of floor area and 31.1 m³. The door opening is 2.226 × 2.189 m (width × height), separate from the internal dimensions. These are model reference dimensions; manufacturing and equipment can cause small differences. The reference side opening is 5.702 × 2.189 m (width × height).
What does “Used · last trip” mean for this container?
Last trip describes a container sold at the end of its shipping service, not automatically one in poor condition. Wear and repairs depend on the unit: examine its doors, floor and seals in recent photographs. For further transport, unit suitability and CSC plate validity must be assessed separately from this description.
How can I reduce moisture and condensation during storage?
A metal wall can collect condensation when humid air meets a cold surface, even without water ingress. Store dry goods, pallets and packaging, maintain air circulation around the load and monitor humidity, especially after large temperature changes. Sensitive goods need moisture protection and ventilation suitable for their use. An uninsulated dry container does not maintain a constant temperature.
Does the price include delivery and taxes?
This configuration costs $4,981.5 excluding tax for one container. Transport, unloading and any fit-out are quoted separately for your request. Currency and price follow the selected country; the proposal sets out applicable taxes and the complete amount.
What should I prepare to request a project quote for Canada?
The container occupies about 14.8 m², with an external base of 6.058 × 2.438 m. That area excludes door swing and space for the truck and handling equipment. Prepare a stable, level location and provide the postal code or area, narrow passages, turns, slopes, obstacles and available unloading equipment. These details support transport pricing and selection of a suitable vehicle. Give the municipality, province or territory and physical address with the complete postal code. Postal code: 6 alternating letters and digits. Format example: H2Y 1C6. Use your site’s code, not this example. Specify the entrance the truck can actually use, especially if it differs from the main address. If the land is away from the stated street, add directions to the entrance and a landmark. The proposal should confirm transport, unloading, availability and timing for this site.
What happens after I submit my postal code request?
Your selection and delivery details are sent through Quotbox to approach suppliers. They are used to propose a unit and detail the container, taxes, transport and unloading. You can compare that proposal and refine your project before accepting it. The form is a no-obligation enquiry with no automatic purchase or payment.
