Side opening is useful when loading or reaching individual storage areas through end doors becomes difficult. Compare the full route of each item, forklift movements and door swing space before choosing a 20- or 40-foot model. Your project for Canada: use this guide to prepare placement alongside the technical container choice. Specify the entrance the truck can actually use, especially if it differs from the main address. If the land is away from the stated street, add directions to the entrance and a landmark. To start comparing a specific reference, see Container 20 ft Double Door · Used · last trip · Beige.
Measure the load in its handling position
Record item or pallet length, width, height, weight and packaging. Draw the load carried on the forklift, not only sitting on the ground. Request clear opening width and height, fixed post positions and threshold dimensions to check the entire route.
Choose side opening, standard or double door
Side-opening models provide access along a side; check whether the opening is full or partial. Standard units load at one end. Double-door units allow access from both ends, useful for reaching the rear, but do not create a side entry for long items.
Reserve working space for manoeuvres
Draw open doors, forklift route and pallet staging positions next to the container. Check walls, fences, slopes and ground. Container length does not establish turning space; confirm the room needed by your actual equipment and preserve circulation routes.
Check closures and loading limits
Request a door, lock and seal demonstration and threshold photographs. Confirm floor loading limits for your equipment and necessary securing points. Compare purchase cost with daily handling, then obtain transport and unloading prices using the postal code.
Which opening suits your handling routine?
| Configuration | Use to compare | What to measure |
|---|---|---|
| Standard end doors | One-end loading and storage organised in depth. | Clear opening and route to the rear. |
| Double door | Access from both ends and retrieval from each short side. | Working space and closure at both ends. |
| Side opening | Side access for pallets and long items. | Actual opening, posts and door movement. |
| Open Top | Loading from above where horizontal entry is unsuitable. | Top opening, lifting and suitable closure. |
CONTAINER ORIGIN
Information to send to the supplier
- Load dimensions and weight.
- Handling orientation and equipment.
- Clear opening, threshold and posts.
- Door and manoeuvring plan.
- Floor loading, securing and closure.
- Delivery access and postal code.
Explore suitable models
Compare catalogue references
Container prices exclude tax. Delivery and unloading are quoted using your postal code. Specify equipment and the actual offered unit’s performance in the supplier offer.
CA-20-OPEN-SIDE-NEW-BLUE
Container 20 ft Open Side · New · one trip · Blue
New · one trip / Blue
$8,159Excluding tax
Request an offer
CA-40-OPEN-SIDE-NEW-BLUE
Container 40 ft Open Side · New · one trip · Blue
New · one trip / Blue
$12,402.5Excluding tax
Request an offer
CA-40-DOUBLE-DOOR-NEW-BLUE
Container 40 ft Double Door · New · one trip · Blue
New · one trip / Blue
$6,642Excluding tax
Request an offerPractical questions
Does the whole side open?
That depends on the configuration. Request a plan and the actually clear opening dimensions, including fixed posts. A 20- or 40-foot external length does not describe the usable opening.
Can a forklift drive inside?
Check loaded machine height, width and mass, the threshold and floor loading limits. Have the supplier and handling manager confirm compatibility before planning to drive the forklift inside.
Can double doors replace side opening?
They provide access at both ends. This helps arrange storage in depth, but an item too long to turn through an end opening may require side entry or loading from above.
Must I keep space free along the entire side?
Draw the doors in the intended working position and your equipment route. Required clearance depends on the opening mechanism and manoeuvres; request the model plan instead of assuming a universal distance.
What should I prepare to request a project quote for Canada?
Give the municipality, province or territory and physical address with the complete postal code. Postal code: 6 alternating letters and digits. Format example: H2Y 1C6. Use your site’s code, not this example. Specify the entrance the truck can actually use, especially if it differs from the main address. If the land is away from the stated street, add directions to the entrance and a landmark. The proposal should confirm transport, unloading, availability and timing for this site.